|
|
首页 >>> 产品目录 >>> 日本北阳HOKUYO
|
产品[北阳UST-05LN/05LA光电开关]资料
|
如果您对该产品感兴趣的话,可以
产品名称:
北阳UST-05LN/05LA光电开关
产品型号:
产品展商:
日本北阳
简单介绍
北阳UST-05LN/05LA光电开关
电源电压:10 to 30V
检测距离:5m
反应时间:66ms
原装正 品北阳UST-05LN/05LA光电开关
|
北阳UST-05LN/05LA光电开关的详细介绍
|
北阳UST-05LN/05LA光电开关
Product name
|
Scanning Laser Range Finder
|
Model
|
UST-05LN/UST-05LA
|
Supply voltage
|
DC 12V/DC 24V (operation range 10 to 30V, ripple within 10%)
|
Supply current
|
150mA (DC 24V) or less (during start up about 400mA is necessary.)
|
Light source
|
Laser semiconductor (905nm), Laser class 1(IEC60825-1:2007, Accession number:1420210-000)
|
Detection range and object
|
60mm to 5000mm (white Kent sheet)
60mm to 2000mm (diffuse reflectance 10% )
Minimum detectable size 130mm (changes according to distance)*1
|
Accuracy
|
60mm to 5000mm ±40mm*2
|
Standard deviation
|
σ<20mm*2
|
Scan angle
|
270°
|
Scan speed
|
25msec25ms (motor speed 2400rpm)
|
Angular resolution
|
0.5°
|
Start up time
|
Within 10 sec (start up time differs if malfunction is detected during start up)
|
Outputs
|
Photo-coupler, open collector output Max DC 30V 50mA
Output 1: Output 1 OFF during object detection
Output 2: Output 2 OFF during object detection
Output 3: Output 3 OFF during object detection
Malfunction output: ON during normal operation, OFF during malfunction Synchronization output: Synchronization signal during Master/Slave operation. Note: Output 1 to 3 are switched OFF during malfunction state
|
Inputs
|
Photo-coupler, common anode, power supply is 4mA when input is ON Input 1 to 5: Area switching inputs (refer Table1) Synchronization input: Input synchronization signal during Slave operation.
|
Output response time*3
|
OFF : 66msec to 3241msec
ON : 66msec to 3241msec
|
Hysteresis
|
Hysteresis high (6.25%, not less than 60mm)
Hysteresis low (3.125%, not less than 30mm)
No Hysteresis (Default)
|
Interface
|
USB/RS422(UST-05LA only)
|
LED display
|
Blue LED: ON during normal operation,
blink during the start up,
Orange LED 1: Output 1 ON during object detection
Orange LED 2: Output 2 ON during object detection
Orange LED 3: Output 3 ON during object detection
|
Synchronization function
|
Synchronization Master/Slave operation mode (can set by using Area Designer)*4
Synchronization slave mode (0°)
Synchronization slave mode (90°)
Synchronization slave mode (180°)
Synchronization slave mode (270°)
|
Surrounding intensity
|
Less than 15,000lx
Note : Avoid direct sunlight or other illumination sources as it may cause sensor malfunction
|
Ambient temperature humidity
|
-10°C to +50°C, below 85%RH (without dew, frost)
|
Storage temperature humidity
|
-30°C to +70°C, below 85%RH (without dew, frost)
|
Vibration resistance
|
10 to 55Hz double amplitude of 1.5mm for 2hrs in each X, Y, and Z direction
55 to 200Hz 98m / s2 sweep of 2min for 1hr in each X,Y and Z direction
|
Shock resistance
|
196m/s2 (20G) X,Y and Z direction 10 times.
|
Insulation resistance
|
10MΩ, DC 500V
|
Protective structure
|
IP65
|
EMC standards
|
(EMI)
EN61326-1:2013
EN55011:2009 + A1:2010
(EMS)
EN61326-1:2013
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 + A2:2010
EN61000-4-4:2012
EN61000-4-6:2009
EN61000-4-8:2010
|
Weight
|
130g
|
Material
|
Front case: Polycarbonate, Rear case: Aluminum
|
Dimensions (W×D×H)
|
50×50×70mm
|
*1. In the case of installing the sensor parallel to the Emitter/Receiver surface. Minimum detectable size of the object can be set by Area Designer.
*2. Under the factory standard testing condition using white Kent sheet.
*3. Initial setting is 66msec. ON/OFF delay function switching is possible by Area Designer. Response time can be further delayed by a maximum of 1scan during the area switching.
*4. Initial setting is synchronization master. When using synchronization operation, refer to section 5.3 for details about synchronization wiring. Synchronization slave setting is possible using Area Designer.
公司简介:
深圳市创丰仪器仪表有限公司是一家专业从事进口自动化产品代理销售及系统集成的高新技术商贸企业,位于深圳市宝安宝源路广福大厦(宝安互联网基地旁)
主营品牌有:azbil,takex,keyence,omron,sunx,fotek,honeywell,banner,moujen,toho等知名品牌.长期以来,创丰公司以多年的行业经验、充足的货源、优惠合理的价格、良好的商业信誉、优 质.快捷的服务、再配合具有国际知名度的品牌,已将所代理的产品广泛应用在全 国各地的冶金,化工,机械,电子,包装,数控机床,热处理,纺织机械,轻工、食品包装、家电等行业,并赢得广大用户的高度信赖与好评,建立起良好长久的合作关系。
深圳市创丰仪器仪表有限公司
深圳市宝安区宝源路广福大厦1003
|
|
|
|