Detection method

Through beam

Detecting distance

50m

Detectiing object

dia.22mm or more

Power Supply

12-24VDC ±10% Ripple 10% or less

Current consumption / Power consumption

Transmitter: 30mA or less / Receiver: 35mA or less

Output mode

NPN open collector output
Rating: Sink current 200mA (30VDC) or less

Operation mode

Light ON/Dark ON (selectable with switch)

Light monitor

NPN open collector output
Rating: sink current 200mA (30VDC) or less

Alarm output*1

NPN open collector output
Rating: Sink current 200mA (30VDC) or less

Response time

5ms or less

Light source

Infrared LED (wave length 910nm)

Indicator

(Transmitter) P.L: Power indicator (green LED) … Illuminated when power on
OP.L: Monitor indicator (red LED) … Illuminated when emit light normally
(Receiver) OP.L: Operation indicator (red LED) …Illuminated when output on
LEVEL: Level indicator (three level display)
LEVEL1: yellow LED illuminated when light intensity of about twice as much as operation level is detected.
LEVEL2: yellow LED illuminate

Switch (SW)

Light ON/Dark ON Remove the case lid of the receiver Light ON … Output at light receiving
selector switch provided to access the switch. Dark ON … Output at light blocking

Materials

Case: Zinc die cast

Connection

Terminal block (screw: M3.5, width: 8.1mm)

Weight

Transmitter: Approx. 700g
Receiver: Approx. 700g

Accessories

Operation manual, Mounting bracket

Ambient light (on light receiving surface)

50,000 lx or less (incandescent lamp)

Ambient temperature

-25 - +55C (Non-freezing)

Storage temperature

-40 - +70C (Non-condensing)

Ambient humidity

35 - 85%RH (Non-condensing)

Protective structure

IP66

Vibration

10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions

Shock

1000 m/s2 / 3 times each in 3 directions

Dielectric withstanding

500 VAC for 1 minute (between input/output and case)

Insulation resistance

500 VDC, 20 MΩ or higher